Alexdent

egypt

Egypt.

Revised version of Capsule Applier III. For GC Fuji cements and restorative materials. All metal, fully autoclavable with an ergonomically correct design for easier use and longer life. Has a rear capsule cover for improved capsule dispensing stability and excess material containment.......

Fuji Gun

<ul><li>Applicator in the form of a gun for the application of capsules in dentistry</li><li>This clamp-type applicator is used by the dentist to directly apply the contents of the capsules into the dental cavity</li></ul>

Veneer Cement
Choice 2 is a light-cured luting cement designed specifically for cementation of porcelain and composite veneers. Choice 2 exhibits color stability which is a critical factor in esthetic veneer cementation. 
Unique Benefits:
<ul><li>Choice 2 is specifically formulated for color stability (Delta E &lt;1.2**) resulting in high esthetics</li><li>Excellent physical properties ensure the restoration will stand up to significant pressure and stress that is placed on veneers daily</li><li>Highly filled resin cement enhances the overall strength of the restoration</li><li>Low film thickness ensures veneers are completely seated</li><li>Corresponding try-in pastes confirm shade selection prior to cementation</li></ul>

Bisco Choice 2 Light Cured Veneer Cement

Choice 2 is a light-cured luting cement designed specifically for cementation of porcelain and composite veneers. Choice 2 exhibits color stability which is a critical factor in esthetic veneer cementation

raafat alaa 4 

Resodont collagen membrane 16x25 (4 cm2)

Z-Prime Plus significantly enhances bond strengths to Zirconia, Alumina and Metal substrates more than any other surface primer on the market due to its unique combination of two active monomers, MDP, a phosphate monomer, and BPDM, a carboxylate monomer. This combination of primers gives Z-Prime Plus a synergistic effect resulting in its high bond strengths. 

Unique Benefits:

• Unparalleled bond strengths to Zirconia, Alumina and Metal restorations • Compatible with light-cured and dual-cured resin luting cements • Convenient, single bottle delivery offers ease of dispensing • Versatility and durability with many different substrates 

• Significantly enhances bond strengths of other resin cements*

Z-PRIME Plus is a single-component priming agent designed to enhance adhesion between indirect restorative materials and resin cements. It is used as a surface treatment for zirconia, alumina, metal/alloy, composite, endodontic posts, and intraoral repair

Bisco Z-prime

Z-Prime Plus significantly enhances bond strengths to Zirconia, Alumina and Metal substrates. 1/2 mm

<ul><li>Temporary
Cement Non Eugenol</li><li>2x10g
Syringes</li><li>Mixing
Pad,Eco Tips</li><li>Suitable for
all temporary cement applications</li></ul>

Charm Temporary Cement Charm NE Syringe

<ul><li>Temporary Cement Non Eugenol</li><li>2x10g Syringes</li><li>Mixing Pad,Eco Tips</li><li>Suitable for all temporary cement applications</li></ul>

Dual Cured Resin Cement<o:p></o:p>
<o:p> </o:p>
<ul><li>Fast and safe applications</li><li>Self-Etching and Self-adhesive of Excellent bond strength</li><li>Easy clean up excess</li><li>Self-cure system without light cure</li><li>Supercem crown and bridge luting cement (self-etch/self-adhesive
resin cement)</li></ul>
<o:p></o:p>

Charm SuperCem

<ul><li>Easy clean up excess</li><li>Fast and safe applications</li></ul>

Light Curing Composite Resin<o:p></o:p>
<o:p> </o:p>
<ul><li>The lowest polymerization shrinkage</li><li>Radiopaque</li><li>High compressive strength</li><li>Excellent shade matching with natural teeth</li></ul>
<o:p></o:p>

CharmFil Plus

<ul><li>The lowest polymerization shrinkage</li><li>Radiopaque</li><li>High compressive strength</li><li>Excellent shade matching with natural teeth</li></ul>

Light curing Temporary Filling Material
"Quicks®” is a light curing temporary filling
material. It is not sticky, high elasticity, high compressive strength. It has
some advantages such as easy application, tight formagin sealing, easy removal.<o:p></o:p>
<o:p> </o:p>
Blue, Yellow<o:p></o:p>
<ul><li>Time saving/economic system.</li><li>Easy to remove.</li><li>No stickness.</li><li>Easy to take out at once.</li><li>Light Curing Temporary Filling Material.</li><li>Blue and yellow color coded.</li></ul>

Light curing Temporary Filling Material
"Quicks®” is a light curing temporary filling material. It is not sticky, high elasticity, high compressive strength. It has some advantages such as easy application, tight formagin sealing, easy removal.

Quicks Light Curing Temporary Filling (3 syring)

Temporary Filling Material
<ul><li>3 Syringe </li><li>Useful for Inlay/ Onlay cases</li><li>Easy to remove at once</li><li>No stickness</li><li>Save Time/ Economic System</li></ul>
<o:p></o:p>

Vinyl Polysiloxane Bite Registration Impression Material
CharmFlex® Bite is a bite registration impression material
to measure of the occlusal surface, impression of the teeth of a 3-dimension
position for the maxilla and mandible.<o:p></o:p>
It has a short polymerization time and a high final
hardness. Making it easy to use and remove of the low elastic deformation is
suitable for bite registration.<o:p></o:p>
Product Characteristics<o:p></o:p>
<ul><li>Fast setting of bite impression</li><li>High solidity</li><li>The Lowest dimensional change</li><li>Very accurate bite impression.</li></ul>
<o:p></o:p> 
<o:p></o:p>
<o:p></o:p>
<o:p></o:p>
Bite<o:p></o:p>
<ul><li>Working time: 30"</li><li>Setting time in mouth: 60"</li><li>Elastic recovery: 99.9</li><li>Hardness Share A: 90</li><li>Application Range</li><li>Impression of the occlusal surface</li><li>Check the occlusal surface</li><li>Intraoral incisal pin records
after mounting of the occlude</li></ul>
<o:p></o:p> 
<o:p></o:p>
<o:p></o:p>
<o:p></o:p>
<o:p></o:p>
<o:p></o:p>
<o:p></o:p>
<o:p></o:p>
Clinical procedures<o:p></o:p>
<ol><li>Preparation</li><li>Application</li><li>Taking impression</li><li>Take it out of teeth</li></ol>
<o:p></o:p> 
<o:p></o:p>
<o:p></o:p>
<o:p></o:p>

CharmFlex Bite

Product Characteristics<ul><li>Fast setting of bite impression</li><li>High solidity</li><li>The Lowest dimensional change</li><li>Very accurate bite impression.</li></ul><o:p></o:p><o:p></o:p><o:p></o:p><o:p></o:p>

• small with ledge (№
1.0971) 10 pcs.<o:p></o:p>
• small (№ 1.0972) 20 pcs.<o:p></o:p>
• large (№ 1.0973) 20 pcs.<o:p></o:p>
• large with ledge (№
1.0974) 10 pcs.<o:p></o:p>
• medium with ledge (№
1.0975) 10 pcs.<o:p></o:p>
• medium (№ 1.0976) 30 pcs.<o:p></o:p>
• ring (standard) (№ 1.099) 1 pcs.<o:p></o:p>
• clamp Delta (№ 1.299) 1 pcs.<o:p></o:p>
There are 4 types of matrices: 
• 0,050 mm hard, 
• 0,035 mm hard, 
• 0,050 mm soft, 
• 0,035 mm soft.<o:p></o:p>
Specify, please, the necessary type, e.g.,
1.398 - hard 0,035 mm, 
otherwise you' ll receive matrices of the first type, i.e. hard 0,050 mm.<o:p></o:p>
WARNING!!! 
When operating with ring: 
1) make sure of integrity of the ring and
absence of rust on it; 
2) avoid high-speed opening; 
3) open the ring for width not more than 10 - 12
mm; 
4) open the ring for necessary width outside the
mouth before placing it on a tooth. 
 
 
<o:p></o:p>
CLEANING AND STERILIZATION INSTRUCTIONS:<o:p></o:p>
 
1) Submerge instruments in cleaning agent solution with neutral pH for 20
min; 
2) Rinse the instruments thoroughly with purified water for 3-5 min;<o:p></o:p>
3) Perform standard moist
heat / steam sterilization procedure following the sterilizer instructions. 
 
 
WARNING!!! 
1) Do not use cleaning agents with high
percentage of chlorine and cleaners containing oxalic acid; <o:p></o:p>
2) Do not keep instruments in liquid medium for
more than 3 hours

TOR-VM Sectional Matrix Kit 100 Pcs . no 1.398

<h5 style="font-stretch: normal; line-height: 18px; font-family: Arial, Helvetica, sans-serif; font-size: 14px; margin-bottom: 0px; color: rgb(92, 92, 92); background-color: rgb(255, 255, 255);">Set of Sectional Contoured Matrices</h5>
100 pcs.

There are 4 types of matrices:
• 0,050 mm hard, • 0,035 mm hard,

TOR-VM Sectional Matrix Large 50 Pcs  no 1.0973

<h5 style="font-stretch: normal; line-height: 18px; font-family: Arial, Helvetica, sans-serif; font-size: 14px; margin-bottom: 0px; color: rgb(92, 92, 92); background-color: rgb(255, 255, 255);">Large Sectional Contoured Matrices</h5>50 pcs. available

TOR-VM Sectional Matrix Large With Ledge 50 PCS no 1.0974 Ledge

<h5 style="font-stretch: normal; line-height: 18px; font-family: Arial, Helvetica, sans-serif; font-size: 14px; margin-bottom: 0px; color: rgb(92, 92, 92); background-color: rgb(255, 255, 255);">Large Sectional Contoured Matrices with Ledge</h5>50 pcs. available