Cairo Dent

egypt

Egypt.

Red Color Thermoplastic impression material in the form of round plates cakes to take primary impression in edentulous cases.

Prevest Hiflex Impression Composition

Product Benefits :
<ul><li>Dual curing light and self curing (initial set time 2 minutes, final set tine 5 minutes).</li><li>Low film thickness - Low solubility in oral fluids.</li><li>2-stage polymerization allows a fast and easy clean up without compromising working time.</li><li>Fully compatible with acrylic and bis- acrylic temporary materials.</li></ul>
 
Indications :
<ul><li>Permanent cementation of crown, bridges and splints.</li><li>Permanent cementation of endodontics posts made of metal, reinforced composite.</li><li>Permanent cementation of implant retined crowns.</li></ul>

Prevest - Fusion Ultra DC

Low viscosity,light and chemically cured,radiopaque, two component nano hybrid composite for the adhesive luting of composite and ceramic restorations.

Dental Town

Features: - Accurate occlusion checking - Easy to cut with a cutter on the case - The clear plastic case enables to check the remaining foil easily - The plastic case is shaped to hold comfortably Application: - Used to make a final check on occlusion 8㎛ Thick 8mm Width 6m (meter) Long Foil

DENU Shim Stock with Cutter (Occlusion Checking Foil)

Ena Post Post is a dental post made of glass fibers and resin used to reinforce restorations or core build-up in devitalised teeth.
The Ena Post gives perfect functional and aesthetic integration with glass fiber post and composite.
The fibres of the ENA post are inserted into the same fluorescent resin matrix as the HRi hybrid composite giving perfect integration of colour together with conservative strength.
The modulus of the ENA Post is close to dentine and when bonded in pace, produces a monoblock type structure which is proven to be more protective of remaining tooth structure.
They are used after preparing the root canal with a colour-coded drillcalibrated with the post. The coloured rings can be used to measure the depth of the canal, positioning it where the post must be cut. Note: the rings must be removed before cementation.
Two tapered designs (2% and 10%) are available for the appropriate size and taper of the restored tooth.
– Aesthetic – fluorescent and dentine colour – Functional – same elasticity of dentine – Perfectly integrated with the tooth, cement and restorative material – The only post with silanised fibers inserted in the same resin of restorative material (Enamel plus HRi) – Perfect silanisation – Visible on x-ray only 
– Coloured rings for easy identification

Synca ENA - Fiber Post

The fibres of the ENA post are inserted into the same fluorescent resin matrix as the HRi hybrid composite giving perfect integration of colour together with conservative strength.
The modulus of the ENA Post is close to dentine and when bonded in pace, produces a monoblock type structure which is proven to be more protective of remaining tooth structure.
They are used after preparing the root canal with a colour-coded drillcalibrated with the post. The coloured rings can be used to measure the depth of the canal, positioning it where the post must be cut. Note: the rings must be removed before cementation.
Two tapered designs (2% and 10%) are available for the appropriate size and taper of the restored tooth.
View the full range of&nbsp;<a href="https://optident.co.uk/manufacturer/micerium/">Micerium Products</a>
– Aesthetic – fluorescent and dentine colour
– Functional – same elasticity of dentine
– Perfectly integrated with the tooth, cement and restorative material
– The only post with silanised fibers inserted in the same resin of restorative material (Enamel plus HRi)
– Perfect silanisation
– Visible on x-ray only
– Coloured rings for easy identification

​

The fibres of the ENA post are inserted into the same fluorescent resin matrix as the HRi hybrid composite giving perfect integration of colour together with conservative strength.

ENA Fiber Post-Drill

Sanden Fiber post

The Huffman Dental Leaf Gauge is one of the most cost effective dental diagnostic tools you will ever use.
The Leaf Gauge is made of 56 individual Polyester strips numbered (1-56). Each leaf is 0.1mm thick – allowing a rapid reading to the operator&nbsp; in small enough increments to make it extremely accurate.
Easy to disinfect for reuse. Our newer versions of the tool can be sterilized with Autoclave.
The device is highly valued by dental professionals as it is incrementally used in the process of occlusal equilibration, for the maintenance of vertical dimension in the recording of interocclusal records and in the initial diagnosis of prematurities in TM Joint disturbances.
Each unit is high quality, made in the USA and backed with a full one year warranty against defects.

The Huffman Dental Leaf Gauge is one of the most cost effective dental diagnostic tools you will ever use.



Huffman Numbered Leaf Gauge

Fiberglass ribbons of different size and thickness. The application is very easy: the Fiber-Splint strip is saturated with bonding agent (Fiber-Bond), positioned on the etched and bonded palatal/lingual surfaces, then fixed in the interdental area with “Clip&Splint” application clips and lightcured. Fiber-splints are very versatile and realize highly aesthetic results. The practical dispenser allows to avoid waste of material.

​Fiberglass ribbons of different size and thickness. The application is very easy: the Fiber-Splint strip is saturated with bonding agent (Fiber-Bond

Fiber Splint

Transparent Impression Material, it enables to harden inside of the resin when light-cured Applications:- Crown and bridge impression- Inlay and onlay impression[Apply Vaseline on the tooth and set Crown Resin after making a shape with Transparent Silicone and light cure Transparent Silicone from the outside. The mixing tip for Light Body without oral tip (yellow colored) should be used]

DENU Trans Sil (Vinyl Polysiloxane Impression Material)

Denu Bite Sil impression material has a light mousse consistency that stays exactly where you put it without slumping when injected onto an occlusal surface.
• Do not compress or flex upon mounting.
• Easy handling and placement, Outstanding accuracy.
• Very hard, No distortion.
• Useful as a quick die for temporary inlays and onlays.
• Fast and easy to trim.
• Dual port cartridge prevents clogs and cross-contamination between base and catalyst.
• Very Fast Set formula, work for 20 seconds and sets in 30 seconds.
• Light mousse consistency with minimal resistance to closure.
• Less expensive than the leading bite materials.

Denu Bite Sil impression material has a light mousse consistency that stays exactly where you put it without slumping when injected onto an occlusal surface.

Denu BiteSil 50ml

<h3>Ena Fiber Post kit contents:</h3>
<h3>20 posts + 4 drills</h3>
<img src="https://dentacarts.com/images/82470260_2569148263194837_5811024982653796352_n.jpg?1641814068280">

Ena Fiber Post kit

MEIT Ltd.

<ul><li>Especially suitable for full contour zirconia restorations Highond concentration for more efficiency Makes glazing unnecessary Before polishing, grinding is done with DIASYNT PLUS</li><li>8 Pcs</li><li>Grey Blue = Removing</li><li>Green&nbsp;= Smoothing</li><li>Orange&nbsp;= High-Lustre Polishing</li></ul>