Elmam-Medical-Group

egypt

Egypt.

The flowability ensures easy applications that require details and also easy to use on tooth bridge or tooth barriers. It is used as Base and Liner for restorations as well as for tooth bridges or tooth barriers. Features: - Excellent water-soluble material with optimal&nbsp;nano hybrid filler -&nbsp;Compressive strength: 340 Mpa, Flexural strength: 150 Mpa, Hardness: 65 Mpa - Excellent invasion to the dental cavities by superb flowability - Low polymerization shrinkage, Available in adhering orthodontic bracket - Aesthetic is well considered by matching the near-natural tooth Applications: - Cavity liner for direct restoration, Small and deep minute gap - Sealing of pit and fissure, Base and liner of restoratives - Block-out of undercut

​The flowability ensures easy applications that require details and also easy to use on tooth bridge or tooth barriers. It is used as Base and Liner for restorations as well as for tooth bridges or tooth barriers.

Denu Flow Resin 2x2 gm

Dental Town

DENU Etch 37 (Semi Gel Type Etching Agent with Phosphoric Acid) 
Features: - Optimal viscosity for precise placement and excellent control - Excellent etching of dentin and enamel - Provides excellent etching depth - Perfect removal and no debris left after etching - No leak from the syringe after use Applications: - Etching for bonding composites, sealants or adhesives.

​Features:
- Optimal viscosity for precise placement and excellent control
- Excellent etching of dentin and enamel
- Provides excellent etching depth
- Perfect removal and no debris left after etching
- No leak from the syringe after use
Applicatio

Denu Etch 3ml

<h3>INDICATIONS</h3>

Master-Dent®&nbsp;Flow Composite is a light cured flowable hybrid resin restorative recommended for Class III, Class IV and Class V restorations, combining the Bis-GMA chemistry with a non-slumping flowability for easier placement and contouring. Flows into the preparation versus traditional packing and manipulation. Dispensed through a syringe with an application tip for increased accuracy and fingertip control.

FEATURES - Fast application - Low viscosity, high flow characteristics - Excellent polishability - Superior color stability and well-balanced optical properties - High adhesive strength to etched or mechanically roughened surfaces without need for bonding agents - Multipurpose light cure material
2g syringe
available shades: A1, A2, A3

Master-Dent Flow Composite

MAS DENT

<h3>Light Cure Cavity Liner</h3>
INDICATIONS Master-Dent®&nbsp;Light Cure Cavity Liner has a light paste consistency to facilitate application. This biocompatible resin. filled with hydroxyapetite and barium sulfate, protects the pulp and dentin from acid-containing cements and restoratives.
Presentation:&nbsp;4 x 1.5g Syringes w/ Tips

Master-Dent Light Cure Cavity Liner

INDICATIONS Master-Dent®&nbsp;Pit & Fissure Sealant is designed as a preventive to seal enamel pits and fissures of teeth to reduce the occurrence of caries, particularly in occlusal surfaces of primary and permanent molars, and premolars. It may also be used in the restoration of small carious lesions. Easy to use delivery. FEATURES - Excellent flow properties - Good stability and adhesion to enamel - Quick and direct application via angled tips - Clear or Opaque formula
Presentation:&nbsp;4 x 1.2g Syringes, 9g Etch, 20 tips

Master-Dent Pit & Fissure Sealant (Light Cure)

Intermediate Restorative Material (with Fiber)
 
INDICATIONS Master-Dent®&nbsp;Zinc Oxide Eugenol Reinforced Material (with fiber) has a sedative effect on the pulp and is especially useful for cementation on prepared teeth with exposed dentinal tubules. The addition of polymers as reinforcing agents have transformed it into a final cement and intermediate restorative material with a compressive strength of 37 MPa. Offers excellent adhesion and easy removal. FEATURES - Sedative effect on the pulp - Polymer reinforced for temporary filling or as a base - Compressive strength of 37 MPa - Superior adhesion and easily removed
Presentation: 20g Powder & 10ml Liquid

Master-Dent Reinforced Zinc Oxide Eugenol Material

Globe

Dual-curing universal composite-based luting system
<ul><li>For all materials (metal, composite inlays and ceramic, also zirconium dioxide)</li><li>Bubble-free perfect mixing</li><li>Direct application</li><li>Excellent adhesion to dentine, enamel and to metals</li><li>Special one-step Ceramic Bond for optimal adhesion to porcelain</li><li>Radiopaque</li><li>Available in three shades</li><li>Available as an all-in-one set</li></ul>
<h2>Indications</h2>
<ul><li>Adhesive luting of inlays, onlays, veneers, crowns, partial crowns, bridges, root posts and adhesive bridges (Maryland bridges)</li></ul>
 
 
10g - transparent

Bifix QM - QuickMix syringe

Light-curing fissure sealant with fluorides, white
<ul><li>Quick and direct application from the non-dripping NDT-syringe</li><li>White for application control</li><li>Excellent flow properties and low viscosity</li><li>High stability and good adhesion to enamel</li><li>Perfect marginal adaptation</li><li>Continuous fluoride release</li></ul>
<h2>Indications</h2>
<ul><li>Sealing of pits, fissures and occlusal surfaces for caries prophylaxis</li><li>Facing of damaged enamel surfaces</li><li>Anchoring of orthodontic appliances</li><li>Sealing of composite and cement fillings (protection against moisture)</li><li>Restoration of small carious lesions</li><li>Repair of small defects in composite and amalgam fillings</li></ul>
2g syringe

Fissurit F - Syringe

Kandil

<h1>Woodpecker iLED Max Light Cure</h1>
The woodpecker iLED MAX. More-focused light output.
Upgraded focused light output Unique Woodpecker technology of focused light output reduces 55.87% light angle, allowing more concentrated energy and higher curing efficiency.
Upgraded light intensity Two modes for options; with the maximum light intensity of 2300mw/cm², curing 2 mm resin in 1s, which makes it especially suitable for orthodontic brackets, porcelain veneers and post-core adhesives.
Upgraded wide spectrum The emissions wavelength range of iLED Max Wide Spectrum Curing Light is 385mm-420nm. The additional band can better curing the resin materials containing new-style photoinitiators such as TPO. For example, restoration materials such as Tetric N-Ceram Bulk Fill (Ivoclar), Amelogen Plus (Ultradent), and ENA Hn(Micerium). The additional wave band can also reduce the risk of resin shedding and incomplete curing.
Using a constant power output this light has two program settings:
<ul><li>P1 - Turbo Mode - Light intensity 2300 - 2500 mw/cm2 for 1 - 3 second cures.</li><li>P2 - Normal Mode - Light intensity 1000 - 1200mw/cm2 for 5 - 20 second cures.</li><li>With the Turbo mode the light has a cure time of 1 second for 2mm of resin, with light intensity of up to 2300mw/ cm²</li></ul>
 
It also features:
<ul><li>a 360° fully rotatable head, disposable covers and a rechargeable lithium battery.</li><li>Constant Power Output</li><li>360° Curing</li><li>Fluid Design</li><li>1 sec. for Curing</li></ul>
 
Technical specifications:
<ul><li>Dimensions: 25mm×25mm×240mm</li><li>Net weight: 278g</li><li>Power Input: 100V to 240V, 50Hz/60 Hz</li><li>Wave length: 385nm-515nm</li><li>Light intensity: 1000 mW/cm2~2500mW/cm2</li></ul>

Woodpecker iLED Max Light Cure

Universal adhesive<ul><li>Can be applied with or without phosphoric acid etching</li><li>Excellently suitable for direct or indirect restorations</li><li>Secure adhesion to various materials such as metals, zirconium dioxide or aluminium oxide, as well as silicate ceramics, without additional primer</li><li>Applied in one layer – only 35 seconds total working time</li><li>Indications</li><li>Direct and indirect restorations using any light-curing methacrylate-based restorative, core build-up or luting composite</li><li>Intraoral repair of fillings, ceramic veneers and all-ceramic restorations without additional primer</li><li>Treatment of hypersensitive tooth necks</li><li>Protective varnish for glass ionomer cement restorations</li><li>Sealing of cavities prior to amalgam restorations or prior to temporary luting</li></ul>
<h3>In combination with Futurabond M+ DCA (dual-cure activator)</h3>
<ul><li>Direct and indirect restorations using any self-curing or dual-curing methacrylate-based restorative, core build-up or luting composite</li><li>Luting of root posts with dual-curing or self-curing luting composites</li></ul>
5ml bottle

Futurabond M+ - bottle

Glass ionomer restorative material<ul><li>Spreadable consistency</li><li>Good marginal adaptation</li><li>Very good wetting behaviour</li><li>Continuous fluoride release</li><li>Improved glass ionomer technology</li><li>Good aesthetics in three shades</li></ul><h2>Indications</h2>
For restoration of deciduous teeth (especially class I)
Repair of V-shaped defects and enamel erosions as well as root erosions in the cervical area incl. class V fillings
Cavities caused by carious lesions
Fillings of class III and small fillings of class I (incl. extended fissure sealing) as well as build-up fillings for crowns, linings15gm - 10ml

Ionofil Plus - powder liquid

Self-curing luting material for attachments and secondary denture parts

<ul><li>Very simple chairside use</li><li>High strength values</li><li>Complete set for immediate use, including checking and block out material for primary structures that require protection, e.g. implants</li><li>Ideal combination of self-curing luting material and light-curing correction material</li></ul>
<h2>Indications</h2>
<ul><li>Gingiva-coloured composite for luting attachments, such as ball, Locator and telescope retention elements in prostheses with acrylic bases</li><li>Reluting secondary elements in prostheses with acrylic bases, e.g. connecting bars</li><li></li></ul>