Elwan Dental Supplies

egypt

Egypt.

PermaFlo flowable composite is light-cured, radiopaque, methacrylate-based, and available in eight shades. Its thixotropic properties impart ideal flowability for improved adaptation. PermaFlo composite is 68% filled by weight, with an average particle size of 0.7μm and a low film thickness.
<ul class="bullets"><li>High-fill, high-flow formula</li><li>Highly radiopaque</li><li>Fluoride-releasing formulation</li><li>Eight shades</li><li>Superior polishability</li><li>Strong and wear resistant </li></ul>

Ultradent Permaflo A1 Refill

PermaFlo flowable composite is light-cured, radiopaque, methacrylate-based, and available in eight shades. Its thixotropic properties impart ideal flowability for improved adaptation. PermaFlo composite is 68% filled by weight, with an average particle size of 0.7μm and a low film thickness.

raafat alaa

<h2>Endostar E3 Azure Big:</h2>
 Is not a separate rotary system. This is an extension of the Endostar E3 Azure Basic and is used for shaping wide canals, for which final preparation to size 30 is not sufficient. It should always be preceded by initial preparation performed with the Endostar E3 Azure Basic or Endostar E3 Basic. 
<ul><li>The handpiece should run at 300 rpms. The operating speed of the handpiece should be constant throughout the shaping process.</li><li>Do not apply excessive force. An up-and-down motion should be used when operating the files.</li><li>Shaping time should be as short as possible.</li><li>Always use a lubricating agent when shaping the canal.</li><li>The files are very sharp and should be used very carefully, with little force and without excessive "thrusting".</li><li>Operate the instruments and handpieces according to their operating instructions (especially torque settings and speed).</li><li>Use the type and amount of instruments that is truly needed in a given clinical situation.</li><li>Control the number of times that the instrument was used.</li><li>Before using the instruments, be sure to run them outside the oral cavity and check for deformations, scratches and cracks.</li><li>Dispose as medical waste.</li><li>It is a natural phenomenon that Endostar E3 Azure bent files do not back to stright shape at room temperature, as is the case with files made of unmodified NiTi alloys.</li><li>Endostar E3 Azure files can be pre-bent, such as steel files, before inserting into the root canal.</li><li>It is also acceptable to insert bent file into the canal and then start the micromotor, which simplify access to the canals in the molars.</li></ul>
<h5 style="-webkit-tap-highlight-color: rgba(0, 0, 0, 0); margin-top: 10px; margin-bottom: 10px; color: rgb(102, 102, 102); font-size: 14px; font-family: &quot;Open Sans&quot;, sans-serif; background-color: rgb(255, 255, 255);">2. Recommended movements:</h5>
All instruments have been designed and manufactured in such a way that they can be used in three types of movements depending on the individual preferences of the dentist, the diagnosis of a given case and the contra-angle handpiece available in dental office.
<ul><li>Rotary movement - the instrument rotates continuously 360° in a clockwise direction (CW - Clock Wise).</li><li>Reciprocal movement - the instrument performs alternating movements: clockwise (CW) and anti-clockwise (CCW - Counter Clock Wise) except that the CW movement angle must be larger than CCW angle, e.g. 90° CW and 30° CCW. It is recommended that the rotation in the CW direction should be in the range of 90° to 270° and in the CCW direction in the range 30° to 90°, so that the net rotation in the CW direction in each cycle is in the range of 60° to 240°, which means a full 360 CW rotation (according to clockwise) after 1.5 to 6 cycles.</li></ul>
 <img src="https://d1x0v0tfzzbggv.cloudfront.net/images/mdas.PNG?1564921245506" "="">
<ul><li>Complex movement - it is a kind of movement that connects the rotary movement with the reciprocal movement. After inserting file into the root canal, the file performs a rotary motion, and if the resistance for the file in the canal is too high, the rotary motion changes to a reciprocating movement, when the resistance decreases, the rotary motion returns. An example of this is OTR movement.</li></ul>
<h5 style="-webkit-tap-highlight-color: rgba(0, 0, 0, 0); margin-top: 10px; margin-bottom: 10px; color: rgb(102, 102, 102); font-size: 14px; font-family: &quot;Open Sans&quot;, sans-serif; background-color: rgb(255, 255, 255);">3- Recommended Torque:</h5>
<ul><li>standard torque(Ncm): 2.1 </li><li>Advanced torque (Ncm): 3</li></ul>
Files should be used with motor speed at 300 rpm.Don't exceed the upper torque limit.
<h5 style="-webkit-tap-highlight-color: rgba(0, 0, 0, 0); margin-top: 10px; margin-bottom: 10px; color: rgb(102, 102, 102); font-size: 14px; font-family: &quot;Open Sans&quot;, sans-serif; background-color: rgb(255, 255, 255);">4- Clinical instructions for use (Endostar E3 Azure Big):</h5>
<ul><li>After preparation of the canal with the use of file No. 3 from the set of Endostar E3 Azure Basic is completed, shape the canal with instrument No. 1 from the Endostar E3 Azure Big (04/35) until full working length is reached. Finish with hand NiTi file size 35. Insert the file at the working length (vertical movement without rotation). If you feel a slight resistance to the further movement of the file at the working length, this means that the preparation can be finished on size 04/35. If you feel that the file does not encounter resistance at the working length, it is advisable to expand the canal described in point 2. </li><li>Shape the canal by inserting instrument No. 2 (04/40) at full working length. Finish with hand NiTi file size 40. Insert the file at the working length (vertical movement without rotation). If you feel a slight resistance to the further movement of the file at the working length, this means that the preparation can be finished on size 04/40. If you feel that the file does not encounter resistance at the working length, it is advisable to expand the canal described in point 3.</li><li> Shape the canal using instrument No. 3 from the Endostar E3 Azure Big (04/45) until you reach full working length. Finish with hand NiTi file size 45. Insert the file at the working length (vertical movement without rotation). If you feel a slight resistance to the further movement of the file at the working length, this means that the preparation can be finished on size 04/45. If you feel that the file does not encounter resistance at the working length, it is advisable to expand the canal larger-sized NiTi hand files such as size 50, 55, 60 etc. </li></ul>

Endostar Azure CM Wire Big Apical

Endostar E3 Big Apical
Is an add-on set to the basic
Endostar E3 system, intended for
use in cases of wide canals, where
the final preparation to #30 is not
enough. This is not a standalone
system, it should only be used after
the initial preparation
with the E3 basic set .

GPR Endostar instruments are used for removal of old gutta percha filling from the root canal system.
GPR Endostar set consists of 4 instruments of different sizes and tapers marked with numbers from 1 to 4.
The instruments are rather aggressive and should be used with standard endodontic motors working
150 - 300 rpm.
They remove the old gutta percha filling with great efficiency, enabling the dentists to do the re-endo
procedures or some other endodontic treatment. GPR refills consist 6 instruments of the same size.
They are packed in white box, with a silver Endostar label.

How to use them: 
<ol><li> Apply a rubber dam (recommended). </li><li>Use GPR size 1 for the coronal part of the canal to remove the part of the guttapercha from 1/3 to 2/3 of
the canal. If the instrument is too thick use smaller instrument sizes 2,3 or 4. </li><li>Use smaller instrument to remove gutta percha from the next part of the canal, repeat the procedure until
you reach the apical part of the canal. Irrigate the canal as required.
</li></ol>
<img src="https://d1x0v0tfzzbggv.cloudfront.net/images/images/%D8%AE%D8%AE%D8%AE%D8%AE.PNG?1564932895820">
 
Available Kits:
Intro Kit 1:&nbsp;
Intro Kit 2:
<table><tbody><tr><td>[Intro Set, 30/12 (17 mm), 30/08, 30/06, 30/04, 4 pcs]</td></tr></tbody></table>
<table><tbody><tr><td>[Intro Set, 30/12 (17 mm), 30/08, 30/06, 3 pcs]</td></tr></tbody></table>

Endostar Gutta Percha Remover GPR

<ul><li>Working speed of the contra angle/micromotor/handpiece: 150 - 300 rotations/minute.</li><li> If not deformed, sizes 1 and 2 can be used up to 10 times, sizes 3-4 up to 5 times.</li></ul>

<h3 style="font-family: Arial, Helvetica, Verdana, Tahoma, sans-serif;">Features:</h3>
<ul><li>The handpiece should run at 300 rpms. The operating speed of the handpiece should be constant throughout the shaping process.</li><li>Do not apply excessive force. An up-and-down motion should be used when operating the files.</li><li>Shaping time should be as short as possible.</li><li>Always use a lubricating agent when shaping the canal.</li><li>The files are very sharp and should be used very carefully, with little force and without excessive "thrusting".</li><li>Operate the instruments and handpieces according to their operating instructions (especially torque settings and speed).</li><li>Use the type and amount of instruments that is truly needed in a given clinical situation.</li><li>Control the number of times that the instrument was used.</li><li>Before using the instruments, be sure to run them outside the oral cavity and check for deformations, scratches and cracks.</li><li>Dispose as medical waste.</li><li>It is a natural phenomenon that Endostar E3 Azure bent files do not back to stright shape at room temperature, as is the case with files made of unmodified NiTi alloys.</li><li>Endostar E3 Azure files can be pre-bent, such as steel files, before inserting into the root canal.</li><li>It is also acceptable to insert bent file into the canal and then start the micromotor, which simplify access to the canals in the molars.</li></ul>
<h5 style="margin-top: 10px; margin-bottom: 10px; font-family: &quot;Open Sans&quot;, sans-serif; color: rgb(102, 102, 102); font-size: 14px; background-color: rgb(255, 255, 255); -webkit-tap-highlight-color: rgba(0, 0, 0, 0);"></h5>
<h3 style="font-family: Arial, Helvetica, Verdana, Tahoma, sans-serif;">2. Recommended movements:</h3>
All instruments have been designed and manufactured in such a way that they can be used in three types of movements depending on the individual preferences of the dentist, the diagnosis of a given case and the contra-angle handpiece available in dental office.
<ul><li>Rotary movement - the instrument rotates continuously 360° in a clockwise direction (CW - Clock Wise).</li><li>Reciprocal movement - the instrument performs alternating movements: clockwise (CW) and anti-clockwise (CCW - Counter Clock Wise) except that the CW movement angle must be larger than CCW angle, e.g. 90° CW and 30° CCW. It is recommended that the rotation in the CW direction should be in the range of 90° to 270° and in the CCW direction in the range 30° to 90°, so that the net rotation in the CW direction in each cycle is in the range of 60° to 240°, which means a full 360 CW rotation (according to clockwise) after 1.5 to 6 cycles.</li><li>Complex movement - it is a kind of movement that connects the rotary movement with the reciprocal movement. After inserting file into the root canal, the file performs a rotary motion, and if the resistance for the file in the canal is too high, the rotary motion changes to a reciprocating movement, when the resistance decreases, the rotary motion returns. An example of this is OTR movement.</li></ul>
<h5 style="margin-top: 10px; margin-bottom: 10px; font-family: &quot;Open Sans&quot;, sans-serif; color: rgb(102, 102, 102); font-size: 14px; background-color: rgb(255, 255, 255); -webkit-tap-highlight-color: rgba(0, 0, 0, 0);"></h5>
<h3 style="font-family: Arial, Helvetica, Verdana, Tahoma, sans-serif;"> 3- Clinical instructions for use ( E3 azure basic):</h3>
<ul><li>Cavity Preparation: Prepare the cavity.Use a rubber dam.</li><li>Location of canals: Locate all canal orifices.Lubricate the canals.</li><li>Specifying the working length of the canal : Specify the working length of the canal using your method of choice .</li><li>Preparing the canal with hand instruments : Continue to shape the root canal with hand files up to size 20. This way, you will create a glide path for rotary instruments. This will also reduce the risk of breaking the rotary file.</li><li>Preparation of the upper part of the root canal : Shape the canal orifice with the Endostar E3 Azrue Basic File No. 1 (08/30) until you reach a maximum of 1/2 of the total canal depth. Do not use this file when the canal is highly curved (in such cases use the Endostar E3 Azure Small).</li><li>Preparation of the middle part of the root canal : Begin to work with file No. 2(06/25). Perform up-and-down movements. Shape the canal up to 2/3 of the working length. Inspect the working length with the size 15 hand file and apex locator. Next, insert file No. 2 at full working length. </li><li>Shaping of the apical part of the root canal : Use file No. 3 (04/30) to widen the apical portion of the canal until full working length is reached. Confirm that full working length was reached with hand file size 15 and apex locator. Next, finish work with a nickel-titanium hand file size 30. Check if the file can be inserted at full working length without obstructions, and if wedging can be felt. If a wider preparation of the apex is needed, continue to work with larger hand instruments size 35, 40 etc. or consider using the Endostar E3 Azure Big.</li></ul>
<iframe style="width: 500px; height: 281px;" src="//www.youtube.com/embed/ND5djLbqRMM" frameborder="0" allowfullscreen=""></iframe>

Endostar CM wire (basic)

The Endostar E3 Azure Basic should be used with normal width, straight or slightly curved canals.Innovation and safety:Endostar E3 Azure is an innovative system created with Azure HT Technology which is our specially designed heat-treatment manufacturing process. The goal of Azure HT Technology was to create files that are extremely flexible and resistant to breaking even in the most complicated clinical cases<ul><li>safe - increased breaking resistance,</li><li>extremely flexible - follows even the most curved canal path,</li><li> effective and easy to use.</li></ul>The Azure HT Technology process modifies the crystal structure of the nickel-titanium files. It allows for the martensite to austenite transformation to occur at near body temperature.This process completely changes the properties of the files. The files can pre-bent before being inserted into the canal. They can easily follow even the most curved canal path, with a minimal risk of perforation, ledges or via falsa.

EndoStar E5 Rotary Files Kit it should be used to check the patency of the root canal.Rotary Endostar Five (E5) files easily fit even in most curved canals, minimizing the risk of perforation.<iframe style="width: 500px; height: 281px;" src="//www.youtube.com/embed/9CBaFNBLL8U" frameborder="0" allowfullscreen=""></iframe>

Endostar E5

Endostar NT2 NiTi Two Rotary System is used for root canal preparation with conventional method.
<ol><li>Prepare the cavity using rubber dam.</li><li>Locate all root canals. Fill out the canal orifice with liquid. Restore patency of all canals about 2 - 3mm from the apex with K-file 15. In the case of very curved and narrow canals use hand instrument size 6, 8, or 10.</li><li>Determine the working length of the root canal using hand file, X-ray or apex-locator.</li><li>Develop the canal orifice using rotary files with greater taper (6 or 8) or use Peeso or Gates reamers.</li><li>Start preparation with a file taper 2 size 20, develop full working length, and subsequently work with instruments 2/25, 2/30, etc. until the desired size is reached.</li><li>Frequently rinse the root canal.</li></ol>
 <img src="https://d1x0v0tfzzbggv.cloudfront.net/images/images/mm.PNG?1565004840727">
The number of use:
If Endostar NT2 NiTi Two Rotary System files are not deformed: instruments for sizes 2/20, 2/25, 2/30 and 2/35 can be used 2-3 times,
of files with sizes 2/40, 2/45 can be used 3-4 times, instruments for sizes 2/50 and 2/55 can be used 4-5 times.The recommended rotational speed is 150 - 300 rev / min.

Endostar Glide Path ( NiTi2 )

Instruments for sizes 2/20, 2/25, 2/30 and 2/35 can be used 2-3 times, of files with sizes 2/40, 2/45 can be used 3-4 times, instruments for sizes 2/50 and 2/55 can be used 4-5 times.The recommended rotational speed is 150 - 300 rev / min.

DM-TRUST

D.M.Varnish Fluoride 15ml

Ceramoseal BC Sealer<o:p></o:p>

 
	One
Componant BC Sealer.
	 
	 
	hydrophilic-antiseptic<o:p></o:p>

 
	 
	Whith Premixed MTA.<o:p></o:p>

 
	 
	Unlike conventional base/catalyst sealers, CeramoSeal BC Sealer utilises the
moisture naturally present in the dentinal tubules to initiate its setting
reaction. This highly radiopaque and hydrophilic sealer forms hydroxyapatite
upon setting and chemically bonds dentine and provide high bond to gutta percha
points. CeramoSeallBC Sealer has a highly alkaline pH and unlike traditional
sealers,CeramoSeal BC Sealer exhibits absolutely zero shrinkage.
	 
	Biocompatible 
	Zero Shrinkage 
	Highly Radiopaque 
	User-Friendly (Premixed Syringable Sealer) 
	High pH during set 
	Ideal Working and Setting Time 
	Composition: 
	Silicone dioxide, aluminum oxide, calcium oxides(M.T.A) titanium dioxide,
barium sulfate, calcium sulfate and calcium carbonate. In special particle size
distribution of nano and micro size.
	 
	Indication: 
	Obturation of root canal cavity either single cone technique or condensation
technique
	 
	Apexification and Retrograde filling (putty type) 
	Perforations and resorption 
	Pulp Capping<o:p></o:p>

 
	 
	Application: 
	Make routine isolation of teeth 
	Unlike many sealers, this product is hydrophilic and setting is enhanced with
slight moisture, so you don’t have to over dry the surface
	 
	For routine root canal obturation. 
	Make regular endodontic procedures, and select the master cone. 
	Insert the tip of the needle as deep into the canal as you can, and withdraw
the plunger as you move backward. 
	 
	To ensure reaching the full working length, use endodontic file or similar
instrument.
	 
	Apply Ceramoseal to the gutta-percha points and insert it to the final
position. 
	 
	Side effects: 
	Side effects are extremely rare including hypersensitivity. 
	Storage: 
	Always close the syringe immediately after use. It is recommended to withdraw
the plunger shortly after use and clean the nozzle of the syringe needle.
	 
	For professional use only, store in dry condition, below 25 oC with tightly
closed pack.
	 <o:p></o:p>

Ceramoseal BC Sealer

Our new PURE REFLECT micro-mirrors on stainless steel frames ensure an incomparable sharpness of the image:Total respect of colors in aesthetics and surgery, + 113% of reflection compared to aluminum.These mirrors are used in microsurgery in periodontics and endodontics with microscopes. Their finesse and the flexibility of the frame allow to get closer to most inaccessible areas.

Prodont Holliger Micro Mirror

Jockey forceps are used to extract upper third molars or wisdom teeth.

Jockey forceps are used to extract upper third molars or wisdom teeth. Shop Now from Dentacarts

Upper Third Molar Forceps (Jockey)

Needle Holder

Available in : Hard Wire Cutter / Light Wire cutter