Nile Dental

egypt

Egypt.

Indicated for all classes of restorations, I-V, Beautifil II LS is a firm but easy handling, stackable, non-sticky universal composite that has been formulated to minimize polymerization shrinkage and resultant shrinkage stress. With superior durability and aesthetics, ideal for both anterior and posterior restorations, Beautifil II LS, delivers predictable clinical efficacy and maximum performance characteristics.
<ul><li>Award-winning handling – stackable and non-sticky</li><li>Polishes in an instant</li><li>Sustained fluoride release/recharge with bioactive Giomer technology</li><li>Great strength and high wear resistance</li><li>Tooth-like aesthetics with natural fluorescence and chameleon effect</li><li>Low volumetric shrinkage (0.85%) and shrinkage stress (2.72 MPa)</li></ul>

BEAUTIFIL II LS - Shofu

Self etching fluoride releasing pit & fissure sealant
This fissure sealant is simple and gentle on the tooth substance and consists of the BeautiSealant primer and the BeautiSealant paste. The self etching primer shortens the conventional treatment time by eliminating the treatment steps of etching and rinsing.
The treatment is gentle, as the demineralised and dehydrated Effect of the phosphoric acid etching on healthy tooth substance is avoided.
<ul><li>BeautiSealant achieves a sheer bond strength of 19.5 MPa, which is comparable or even better than fissure sealing with phosphoric etching.</li><li>The BeautiSealant paste continuously releases fluoride.</li></ul>
Secure Seal
The paste has an optimal flow and bubble free consistency and is easy to apply, hence completely filling and permanently sealing gaps and voids. A specially developed ultra fine 27 gauge cannula (ø 0.4 mm) for precise application is part of the set.
Benefits
<ul><li>Ideal handling and viscosity</li><li>Eliminate trapped air due to bubble free consistancy</li><li>Radiopacity equal to dentine: 0.92 mm Al</li><li>High shear bond strength without etch and rinse technique</li><li>Application in four easy steps within 30 seconds</li></ul>
Indications
Preventive pit and fissure sealant of deciduous and permanent teeth
PACK: 1.2 g paste + 3 ml Primer

BeautiSealant Set - SHOFU

Diamond impregnated polishing paste for intra- and extraoral high gloss polish
DirectDia Paste is a 20 % diamond polishing paste that uses synthetic diamond powder (particle size between 2 and 4 µm) as an abrasive grain. It provides high lustre polishing to any restoration and has been developed for polishing natural teeth or restorative materials, including porcelain, direct composites, or metals. The paste has a pleasant lime flavor and is easy to detect in the patient´s mouth because of it´s light green colour.
Indications
<ul><li>Removal of discolourations and high lustre polishing of all restorative materials</li><li>Polishing and cleaning of natural teeth</li></ul>
info
Recommended for use with Super-Snap Buff Disks and Buff Mini-Disks. The flexible felt disks allow an Effective application and reach all areas of the natural tooth.
To prevent splatter and avoid excessive heat generation always use rotary instruments at speeds below 10,000 rpm.
The target surface is not required to be dry; water- or saliva moistened surfaces are entirely acceptable. Subsequently rinse thoroughly with water.
Benefits
<ul><li>Green colouration to be easily distinguished in the patient’s mouth</li><li>Exact dosing by the application tip</li><li>Coordinated viscosity for easy handling</li><li>Palatable lime flavour</li></ul>

DirectDia Paste - SHOFU

Ceramic-based CAD/CAM material for durable, metal-free restorations
Shofu Block HC can be used for almost all single-tooth indications for CAD/CAM technology and machined wet or dry in all standard milling units. This high-performance restorative material features exceptional long-term stability and flexural strength, plus lifelike light diffusion. It comes with three different holding pins (Universal, Cerec and Ceramill), in various shades (high- and low-translucency) and as one and two-layer milling blocks. The two additional enamel shades are particularly suitable for aesthetic inlays, onlays and veneers.
For milling with the aid of open CAM systems, SHOFU Disk HC circular blocks, 98.5 mm in diameter, are also available.
Our versatile and stress-absorbing hybrid material can be easily and accurately milled and quickly polished to a high gloss.
Info
For adhesive cementation, we recommend the use of HC Primer, an innovative bonding system infiltrating the polymer matrix and ensuring very high bond strengths in combination with ResiCem.
For easy and efficient pre-polishing and high-gloss polishing, our CeraMaster Coarse and CeraMaster silicone polishers with integrated diamond particles, as well as Dura-Polish and Dura-Polish DIA polishing pastes will be ideal.
Benefits
<ul><li>Stress-absorbing hybrid-ceramic material</li><li>Wide range of shades and translucencies</li><li>Two-layer blocks for aesthetic anterior restorations</li><li>High flexural strength (more than 190 MPa)</li><li>Lifelike light diffusion and fluorescence</li><li>Excellent handling and milling properties</li><li>Easy and efficient polishability</li></ul>
Indications
Fabrication of inlays, onlays, veneers and full crowns for anterior and posterior teeth, as well as implant-supported restorations, using dental CAD/CAM systems
 
<table><tbody><tr> <td>14mm thicness. Diameter 98.5 mm</td></tr></tbody></table>

SHOFU Disk HC

Ceramic-based CAD/CAM material for durable, metal-free restorations
Shofu Block HC can be used for almost all single-tooth indications for CAD/CAM technology and machined wet or dry in all standard milling units. This high-performance restorative material features exceptional long-term stability and flexural strength, plus lifelike light diffusion. It comes with three different holding pins (Universal, Cerec and Ceramill), in various shades (high- and low-translucency) and as one and two-layer milling blocks. The two additional enamel shades are particularly suitable for aesthetic inlays, onlays and veneers.
For milling with the aid of open CAM systems, SHOFU Disk HC circular blocks, 98.5 mm in diameter, are also available.
Our versatile and stress-absorbing hybrid material can be easily and accurately milled and quickly polished to a high gloss.
Info
For adhesive cementation, we recommend the use of HC Primer, an innovative bonding system infiltrating the polymer matrix and ensuring very high bond strengths in combination with ResiCem.
For easy and efficient pre-polishing and high-gloss polishing, our CeraMaster Coarse and CeraMaster silicone polishers with integrated diamond particles, as well as Dura-Polish and Dura-Polish DIA polishing pastes will be ideal.
Benefits
<ul><li>Stress-absorbing hybrid-ceramic material</li><li>Wide range of shades and translucencies</li><li>Two-layer blocks for aesthetic anterior restorations</li><li>High flexural strength (more than 190 MPa)</li><li>Lifelike light diffusion and fluorescence</li><li>Excellent handling and milling properties</li><li>Easy and efficient polishability</li></ul>
Indications
Fabrication of inlays, onlays, veneers and full crowns for anterior and posterior teeth, as well as implant-supported restorations, using dental CAD/CAM systems
 
Size M (12 x 14 x 18 mm)

SHOFU Block HC

Hard – reliable – durable
SHOFU Block HC Hard is the latest generation of our proven hybrid ceramic restorative material, combining the best of both worlds, high-strength ceramics and high-performance composites, in one product.
Thanks to i-PFS (improved Progressive Fine Structured) filler technology, this new CAD/CAM hybrid ceramic material shows an outstanding flexural strength value of over 270 MPa, resulting in excellent durability and wear resistance. Thanks to the force-absorbing properties this new material is an ideal alternative to ceramic or monolithic restorations. Along with its light diffusion characteristics mimicking those of natural teeth, SHOFU Block HC Hard allows the creation of aesthetic, durable and reliable anterior and posterior restorations.
A variety of indications:
<ul><li>Implant-supported restorations</li><li>Anterior and posterior crowns</li><li>Inlays/onlays</li><li>Veneers</li></ul>
Size M (12 x 14 x 18 mm)

SHOFU Block HC Hard for CEREC

Polishing pastes system
Dura-Polish is impregnated with up to 73 % by weight with aluminum oxide particles, and efficiently achieves a very homogeneous surface when prepolishing composite, alloys, denture acrylics and PMMA, especially in difficult to reach areas.
Dura-Polish DIA is filled to an extremely high level (67 % by weight) with industrial diamond particles. Due to the ultra fine particle size of &lt; 1 µm this polishing paste achieves an excellent and consistant high gloss with composite and porcelain.
Indications
<ul><li>Dura-Polish: Prepolishing and polishing of composite, alloy and denture acrylics</li><li>Dura-Polish DIA: High-lustre polishing of composite and porcelain, zirconium and alloys</li></ul>
Benefits
<ul><li>Adhesive character of paste ensures maximum surface contact</li><li>Viscosity of paste minimises splattering</li><li>Economical to use</li><li>Excellent polishability</li></ul>

Dura Polish - SHOFU

Fluoride releasing flowable opaque
Beautifil Opaquer is used for masking discolourations, staining and metal colour as well as pulp capping. The flowable composite is available in the two shades “Universal Opaque” and “Light Opaque” and offers high coverage even with a thin layer.
Indications
Masking discolourations, spots, alloys and pulp cappingAvailable shades :&nbsp;Universal opaque (UO) & Light opaque (LO)

BEAUTIFIL Opaquer - SHOFU

Temporary surface gloss coating
Resin Glaze is a light-cured, surface gloss coating material for temporary restorations. The bonding of the material (Liquid) is increased when used in conjunction with the related Primer.
Indications
For temporary glazing of artificial resin teeth, acrylic denture base materials, CAD/CAM PMMA materials, CAD/CAM hybrid ceramic materials, indirect composite resins, provisional materials

RESIN GLAZE Liquid

For composites, porcelain and gold restorations
The Super-Snap Buff Disks and Buff Mini-Disks feature a synthetic felt polishing cloth on the outer surface which retains expensive polishing pastes with minimum splatter or waste during use. Just a feathery polishing is sufficient for producing a high lustrous shine on porcelain and composites, with the flexible disks adapting to the tooth’s natural contours. The disks have no metal centres or exposed mandrels thus avoiding discolouration of composites or ridge formation. The best results can be achieved in combination with SHOFU polishing pastes.
Benefits
<ul><li>Polishing paste adheres to the felt coating</li><li>Clean and economical working with polishing paste</li><li>No metal centre</li></ul>
Indications
Felt disk for the polish of composites, porcelain or gold restorations with polishing paste
also available as mini disk&nbsp;

Super-Snap Buff Disk

Super-Snap is designed for easy, fast and safe contouring, finishing and polishing of all microfilled and hybrid composites. 
<ul><li>Elastic silicone shank mount for easy placement of the disk onto the mandrel</li><li>Manufactured without a metal center</li><li>Very flexible, ultra-thin disks allow easy access to interproximal areas</li><li>Two sizes – four grits (silicone carbide and aluminum oxide)</li><li>Use Super-Snap for: composites</li></ul>
<h3>CONTENTS</h3>
<ul><li>50 disks</li></ul>

Super-Snap 50 pcs - SHOFU

Polishing of hybrid and micro-charged composites
The Super-Snap and Super-Snap X-Treme system consists of discs and bands intended for polishing hybrid and micro-charged composites.
These discs - evolution of the green and red Super-Snap - are thicker in order to withstand greater contact pressure during polishing.&nbsp;They last longer and are more rigid, while keeping their famous flexibility in the proximal areas.
For the first time, Super-Snap X-Treme discs are manufactured using very advanced 3D technology.&nbsp;The alumina grains have a semi-spherical shape, which leaves space to remove debris.&nbsp;This reduces the risk of plugging the disc and secondary scratches.
Super-Snap X-Treme discs (standard and mini) have two abrasive sides.