Elite-Dentist

egypt

Egypt.

Castroviejo Needle holder&nbsp; Kalt Needle holder Adson Needle holder Mathieu Needle holder

Epic Needle Holder

professional-group-co

Pro Crown is a self-curing resin for the production of temporary crowns, bridges, inlays, onlays and veneers. Pro Crown is based&nbsp; &nbsp;on multifunctional acryl composite, with a mixing ratio of base and catalyst paste of 10:1.&nbsp;
Pro Crown is gentle to the pulp because it has a very low polymerization temperature in the mouth. The temporary is ready for postprocessing after 5 min. The natural translucency and the colour stability allow for esthetic restorations, even without polishing. Pro Crown is available in 10 ml automix-syringes as well as in 50 ml automix-cartridges

Indication: Suitable for the production of temporary crowns, bridges of up to 4 units, inlays, onlays, veneers and for a temporary implant treatment. Physical data: Flexural strength (cross): 105 MPa Storage conditions: dry and protected from light, at 15 – 25 °C / 59 – 77 °F Self life: 2 years

WP Dental Pro Crown 50 ml cartridge

<h1>Re-Cord</h1>
Retraction cord, knitted with 100% cotton-wool. This non-impregnate retraction-cord with thousands of interconnecting tiny loops is building a tubular cord. It guarantees easy application and has got a high absorption capacity. The cord doesn’t frazzle and carries-out an optimate pressure on the sulcus.
<ul><li>100 % knitted cotton-wool</li><li>Non-impregnated</li><li>Even, permanent pressuce on the gum groove</li><li>Absorbs large quantities of blood</li></ul>

<ul><li>Very good retention in the sulcus</li><li>Elastic pressure on the sulcus opening</li><li>Very good hemostatic property</li><li>Does not frazzle</li></ul>

Temporary Retraction of marginal Gingiva and therefore presentation of the preparation-border.
Length:&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;300 cm
Storage conditions: &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;dry and protected from light 0 – 22 °C
Shelf life: &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;1,5 years
Presentation:
WP4919:&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Set with 4 different sizes: size: #00, #0, #1, #2, 4x 300 cm
WP4921:&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Size: # 000, 1 x 300 cm
WP4915:&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Size: # 00, 1 x 300 cm
WP4916:&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Size: # 0, 1 x 300 cm
WP4917:&nbsp;&nbsp;&nbsp;&nbsp; &nbsp;&nbsp;&nbsp;Size: # 1, 1 x 300 cm
WP4918:&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Size: # 2, 1 x 300 cm

WP Dental Retraction Cord

C-Bond is a bonding for the total-etch-technique with an excellent adhesion to dentin and enamel.&nbsp;&nbsp; C-Bond ensures a safe adhesion between the tooth and composites. The material shows a good flowable consistency and is easy to use. C-Bond also adheres on glass-ionomer linings.
 
Adhesive between composites on one hand and enamel, dentin, lining materials like glass ionomer cements on the other hand. C-Bond may not be applied in proximity to the pulp.
 
Step 1: Put 1 – 2 drops of C-Bond on a mixing pad
Step 2: Use a a brush or sponge pellets to apply a thin layer in the prepared and etched cavity
Step 3: Remove surplus with a dry brush or sponge pellet
Step 4: Cure with halogen light for 15 sec.
 
Properties:
•Very easy to use
•Provides safe adhesion of composite to enamel, dentin and lining materials.
•Good longterm results
• Hydrophilic
Advantages:
•Safe adhesion
•Reduced secondary caries
 
Physical data:&nbsp;Viscosity: 3,0 – 8,0 dyn. dPa·s
Storage conditions:&nbsp;dry and protected from light, at 0 – 22 °C
Shelf life:&nbsp;3 years
Präsentation:
WP4300: 1 x 5 ml bottle
WP4230: 1 x 10 ml bottle

WP Dental C-Bond

Competence Flow is a flowable, light-curing composite for direct restorations of the cavity classes III, IV and V as well as repairs of bis-acrylate materials. Competence Flow is thixotropic, which makes it ageeable to handle. The composite does not run away from the place of application but is fluid when manipulated. Competence Flow is also nicely polishable and delivers esthetic restorations. The shrinkage is 1,7 %, which reduces secondary caries. The material is radiopaque.
Fillings of cavity-classes V, small fillings of cavity-classes I and II, fillings at anteriors of the cavity-classes III and IV, fillings of minimal-cavities, extended fissure-sealing at molar and premolar tooth, adhesive fixation of ceramic and composite-restaurations
 
Thixotropic
• Easy to handle
• High-gloss polishable
• Colour stabile
• Radiopaque
• Very low shrinkage of only 1,7 &gt;

WP Dental Competence Flow

Extra Gel is a thixotropic gel for precise etching of enamel. 
It contains 37% orthophosphoric acid. For better control of the etched areas Extra-Gel is blue coloured. Distinctive thixotropic reaction.
<ul><li>Safe and precise dosage possible</li><li>Point-precise application</li><li>No uncontrolled flowing</li></ul>
Density: &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;1,3 – 1,4 g/ml&nbsp;&nbsp;&nbsp;&nbsp;
Storage conditions: &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;dry and protected from light at 0 – 22 °C
Shelf life:&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;3 years

WP Dental Extra Gel

next-dental

Next Offer 1 (Motor)

Next Offer 2 ( Motor W&H + 2 x T6 Implant )

Next Offer 3 ( Motor W&H + 4 x T6 Implant )

Next Offer 4
&nbsp; Motor W&H: implanted classic si-923 with 20:1 handpiece&nbsp;
T6 Implant with abutment (65 pcs)
&nbsp;T6 surgical kit complete (55 pcs)

Next Offer 4 ( Motor W&H +  T6 Implant (65 pcs) + T6 surgical kit (55 pcs) )

Next Offer 5&nbsp; Motor W&H: implanted classic si-923 with 20:1 handpiece&nbsp;T6 Implant with abutment (65 pcs)&nbsp;T6 surgical kit complete (55 pcs)

Next Offer 5 ( Motor W&H +  T6 Implant with abutment (65 pcs) + T6 surgical kit (55 pcs) )

Apex-CAD/CAM-solutions

<div class="video-container"><iframe style="width: 500px; height: 281px;" src="//www.youtube.com/embed/IM04dHwCXbk" frameborder="0" allowfullscreen=""></iframe></div>
<h2><img src="https://dentacarts.com/images/abt__ut2/icore%20tec%20350i%20series.PNG?1654258475982"> </h2>
<h2>All-In-One SolutionCORiTEC®&nbsp;350i HIGHLIGHTS</h2>
<ul><li>Zero point clamping system* for precise repositioning of blanks and adapters</li><li>20-fold tool changer</li><li>Optional Ionizer possible</li><li>Stable 6 mm shaft tools</li><li>CORiTEC 350i Loader with 12-fold blank changer</li><li>Using different adapters is possible, e.g. prefabricated abutments or block materials</li><li>Optimal price-performance ratio</li></ul>
- AIR COOLED SPINDLE :&nbsp;1kW power, 60.000 rpm
- STABLE CHASSIS CONSTRUCTION&nbsp;:&nbsp;Steel/aluminum-based body structure
- Temperature&nbsp;COMPENSATION&nbsp;:&nbsp;High precision due to integrated temperature compensation
- WET / DRY PROCESSING :&nbsp;Integrated wet and dry processing